5. 三层转发命令

• 5.1. ARP命令
  • 5.1.1. clear arp
  • 5.1.2. set protocols arp aging-time
  • 5.1.3. set protocols arp interface proxy enable
  • 5.1.4. set protocols arp interface proxy address
  • 5.1.5. show arp
• 5.2. DHCP Relay命令
  • 5.2.1. set vlan-interface interface dhcp-relay server-ip
• 5.3. 路由表查看命令参考
  • 5.3.1. show route admin distance ipv4 unicast
  • 5.3.2. show route forward-host
  • 5.3.3. show route forward-route
  • 5.3.4. show route table ipv4 unicast
• 5.4. 静态路由命令
  • 5.4.1. set protocols static route
  • 5.4.2. set protocols static route metric
  • 5.4.3. set protocols static route
• 5.5. OSPF命令
  • 5.5.1. set protocols ospf4 area
  • 5.5.2. set protocols ospf4 area area-range advertise enable
  • 5.5.3. set protocols ospf4 area area-type
  • 5.5.4. set protocols ospf4 area default-lsa enable
  • 5.5.5. set protocols ospf4 area default-lsa metric
  • 5.5.6. set protocols ospf4 area interface address authentication
  • 5.5.7. set protocols ospf4 area interface address enable
  • 5.5.8. set protocols ospf4 area interface address hello-interval
  • 5.5.9. set protocols ospf4 area interface address interface-cost
  • 5.5.10. set protocols ospf4 area interface address neighbor
  • 5.5.11. set protocols ospf4 area interface address passive enable
  • 5.5.12. set protocols ospf4 area interface address priority
  • 5.5.13. set protocols ospf4 area interface address retransmit-interval
  • 5.5.14. set protocols ospf4 area interface address router-dead-interval
  • 5.5.15. set protocols ospf4 area interface address transmit-delay
  • 5.5.16. set protocols ospf4 area interface link-type
  • 5.5.17. set protocols ospf4 area interface vif
  • 5.5.18. set protocols ospf4 area summaries enable
  • 5.5.19. set protocols ospf4 area virtual-link
  • 5.5.20. set protocols ospf4 export
  • 5.5.21. set protocols ospf4 import
  • 5.5.22. set protocols ospf4 ip-router-alert enable
  • 5.5.23. set protocols ospf4 rfc1583-compatibility enable
  • 5.5.24. set protocols ospf4 router-id
  • 5.5.25. show ospf4 database
  • 5.5.26. show ospf4 interface
  • 5.5.27. show ospf4 neighbor
  • 5.5.28. clear ospf4 database
• 5.6. BGP命令
  • 5.6.1. set protocols bgp 4byte-as-numbers enable
  • 5.6.2. set protocols bgp bgp-id
  • 5.6.3. set protocols bgp confederation enable
  • 5.6.4. set protocols bgp confederation identifier
  • 5.6.5. set protocols bgp damping enable
  • 5.6.6. set protocols bgp damping half-life
  • 5.6.7. set protocols bgp damping max-suppress
  • 5.6.8. set protocols bgp damping reuse
  • 5.6.9. set protocols bgp damping suppress
  • 5.6.10. set protocols bgp local-as
  • 5.6.11. set protocols bgp route-reflector enable
  • 5.6.12. set protocols bgp route-reflector cluster-id
  • 5.6.13. set protocols bgp peer as
  • 5.6.14. set protocols bgp peer client enable
  • 5.6.15. set protocols bgp peer confederation-member enable
  • 5.6.16. set protocols bgp peer delay-open-time
  • 5.6.17. set protocols bgp peer enable
  • 5.6.18. set protocols bgp peer holdtime
  • 5.6.19. set protocols bgp peer ipv4-multicast enable
  • 5.6.20. set protocols bgp peer ipv4-unicast enable
  • 5.6.21. set protocols bgp peer local-ip
  • 5.6.22. set protocols bgp peer local-port
  • 5.6.23. set protocols bgp peer md5-password
  • 5.6.24. set protocols bgp peer next-hop
  • 5.6.25. set protocols bgp peer peer-port
• 5.7. 路由策略命令
  • 5.7.1. set policy policy-statement term from
  • 5.7.2. set policy policy-statement term then
  • 5.7.3. set policy policy-statement term to
  • 5.7.4. set policy policy-statement then