3. 接口命令¶
- 3.1. 物理接口命令
- 3.1.1. set interface gigabit-ethernet description
- 3.1.2. set interface gigabit-ethernet edge-port enable
- 3.1.3. set interface gigabit-ethernet enable
- 3.1.4. set interface gigabit-ethernet ether-options 802.3ad
- 3.1.5. set interface gigabit-ethernet ether-options flow-control enable
- 3.1.6. set interface gigabit-ethernet ether-options mac-learning enable
- 3.1.7. set interface gigabit-ethernet family ethernet-switching native-vlan-id
- 3.1.8. set interface gigabit-ethernet family ethernet-switching port-mode
- 3.1.9. set interface gigabit-ethernet family ethernet-switching vlan members
- 3.1.10. set interface gigabit-ethernet mtu
- 3.1.11. set interface gigabit-ethernet rate-limiting
- 3.1.12. set interface gigabit-ethernet speed
- 3.1.13. set interface gigabit-ethernet static-mac-address
- 3.1.14. set interface gigabit-ethernet storm-control
- 3.1.15. clear ethernet-switching table
- 3.1.16. clear interface statistics
- 3.2. 汇聚接口命令
- 3.2.1. clear lacp statistics
- 3.2.2. set interface aggregate-ethernet description
- 3.2.3. set interface aggregate-ethernet enable
- 3.2.4. set interface aggregate-ethernet ether-options flow-control enable
- 3.2.5. set interface aggregate-ethernet ether-options lacp enable
- 3.2.6. set interface aggregate-ethernet ether-options mac-learning enable
- 3.2.7. set interface aggregate-ethernet ether-options min-selected-port
- 3.2.8. set interface aggregate-ethernet family ethernet-switching native-vlan-id
- 3.2.9. set interface aggregate-ethernet family ethernet-switching port-mode
- 3.2.10. set interface aggregate-ethernet family ethernet-switching vlan members
- 3.2.11. set interface aggregate-ethernet mtu
- 3.2.12. set interface aggregate-ethernet static-mac-address
- 3.2.13. set interface aggregate-ethernet storm-control
- 3.2.14. show lacp internal
- 3.2.15. show lacp neighbor
- 3.2.16. show lacp statistics
- 3.3. 环回接口命令